Treatment Guide

Check out helpful tips and information to keep your pool water always clean and free of contamination.

Treatment Tips

Water used for testing

After the test, the used water should be discarded, do not return it to your pool water.

The Ways To Treat Your Pool

To properly sanitize pools and maintain proper care, you can use mechanical processes to perform water exchange and chemical treatments such as chlorine application, pool ozone and ph control to sanitize water. All of them are complementary procedures.

How does the chemical treatment of pool water work?

Chemical processes treat water by eliminating microorganisms and dirt particles through reactions between molecules. They inhibit the proliferation of bacteria, fungi, algae and others, and nullify the harmful effects of dirt on water parameters and on the health of swimmers.

Which treatments have the best results?

The best performing treatments for water sanitation are chlorine cleaning, salinization and ozone use.

Which of these treatments is best for your pool?

Among the main products for pool water treatment are Organic Chlorine (Dichloroisocyanurate), Inorganic Chlorine (Hypochlorites), salinization or ozone. However, to choose the one that suits you, you need to consider some criteria, such as: the ability to meet your needs, coupled with a good cost-benefit ratio. Also, you need to be aware of the size of the pool, the treatment equipment you already have, the chemicals that are used, the cost and the maintenance. Depending on the process, the cleaner should undergo training.

Is salinization worth it?

The main objective of salinization is the production of natural chlorine, which is as effective as industrialized chlorine. Salinization consists of applying doses of sodium chloride (the famous cooking salt) in order to produce natural chlorine. This is made possible by the process called electrolysis, which breaks down salt particles and releases natural chlorine in water. Thus, for the treatment to be performed, it is necessary to install in the pool system a specific electrolytic equipment that makes these electrolysis, which increases the consumption of electricity. In addition, in a pool with a lot of use and especially in summer, a supplement with industrialized chlorine must be made.

What are the advantages of salinization?
• It is compatible with any type of pool (fiber, vinyl and masonry);
• Can be used in any type of water (public network or well);
• It is compatible with any chemical used in pool treatment;
• Eliminates all types of microorganisms and chloramine;
• Can be installed in a pool with hot or cold water;
• There is no strong salt concentration: here, the proportion for each liter of water is 10 times smaller than the sea;
• Drastically reduces the risk of allergies, dryness and other problems;
• Do not interrupt the use of the pool for cleaning.
Disadvantages of Salinization
• Has a high value for the purchase of chlorine generating equipment;
• Needs maintenance;
• Only works with electricity (high consumption);
• Changes the pH, with a tendency to increase;
• Does not overchlorinate;
• Swimming pools with elevated usage require complementary treatment with industrialized chlorine;
• Chlorine evaporates in the presence of the sun;
• Salt is highly corrosive and can damage equipment and hydraulic system;
• An error in the salt dosage may result in too salted water and there is no way to remove it;
• It is a technique that has not yet fallen into popular use, so you may have difficulty finding a professional who has mastered the job.
Does ozone make water clean, light and pleasant?

Like chlorine, pool ozone has a great antibacterial and anti-impurity power. Generally, it is most commonly used in large condominium clubs, hotels and gyms.
Ozone acts in the purification of your pool water through a device that will convert oxygen molecules into ozone molecules. To achieve the desired result, the equipment, known as the ozonator, is installed in the pool pipes, and converts it there. It is important to note that this equipment must be in constant operation.

Ozone Advantages
• It is compatible with any type of pool (fiber, vinyl and masonry);
• Does not change alkalinity and pH of water;
• Can be used in any type of water (public network or well);
• It is compatible with any chemical used in pool treatment;
• Eliminates all types of microorganisms;
• Can be installed in a pool with hot or cold water;
• Greatly reduces the possibility of skin and eye irritation;
• Makes water look cleaner and more beautiful.
Disadvantages of Ozone
• The procedure is only possible with the installation of the necessary equipment, generating a high cost for the consumer;
• The equipment needs periodic maintenance;
• Only works with electricity (high consumption);
• The gas is toxic and cannot leak into the pool or engine room;
• oxidizes chlorine;
• Does not act on contaminants and chloramine in pool water. It Acts only when water passes through equipment in engine room;
• May stain fiber, vinyl or tile due to excess gas in pool return nozzles;
• Only works with the filter on, if the filter is off there is no decontamination;
• Even in very low quantities, it is necessary to use industrial chlorine (0.5 ppm);
• Like salinization, it is not yet a very popular treatment, so there are a few professionals who are knowledgeable and practiced in the use of pool ozone.
• High degree of risk to life in case of ozone leakage;
What is industrialized chlorine?

Industrialized chlorine is applied to pool water, and it takes time (around one hour) to act and to be evenly distributed throughout the water. Here, it is essential to respect their proportions in order to avoid problems. The recommended is a minimum of 2 ppm and a maximum of 4 ppm. It is divided into inorganic (calcium and sodium hypochlorites) and organic (based on isocyanuric acid) with disinfectant power, destroying microorganisms.

Advantages of Inorganic Chlorine (Hypochlorites)
• High effectiveness combating and eliminating germs, bacteria and microorganisms in general;
• Low cost;
• Its application is well known to professionals in the field;
Disadvantages of Inorganic Chlorine
• Risk of allergies and dryness of the skin, hair and eye irritation when the treatment is not done correctly;
• Risk of respiratory complications (when overused);
• It is a short-lived treatment that needs to be performed several times a year so that the water is always fit for use.
• Changes ph water;
• Makes the water turbid and milky because it is not fully soluble leaving waste;
• Makes water caustic;
• Interruption in the use of the pool;
• Unstable in the presence of UV rays;
• Not compatible with any surface, promoting dryness and discoloration;
• Damages equipment and piping after some time of use;
• Saturates the sand of the filter;
• Constant labor for the various maintenance required;
• Requires greater water circulation which increases the consumption of electricity;
• Forms by-products of chlorination, called trihalomethanes (thm) that are considered carcinogenic.
• High consumption of products;
Advantages of Organic Chlorine (Dichloroisocyanurate)
Advantages of Organic Chlorine (Dichloroisocyanurate)
• High effectiveness combating and eliminating germs, bacteria and microorganisms in general;
• Eliminates chloramine completely;
• Low cost;
• Does not change the water ph;
• Does not make water cloudy and milky;
• Does not make caustic water, on the contrary, makes it alkaline;
• There is no interruption in the use of the pool;
• stabilized;
• Its application is well known to professionals in the field;
• Can be used in all types of pool;
• Compatible with most equipment and pumps found on the market.
• Does not saturate filter sand;
• Reduces 50% use of chemicals;
• Reduces 50% of the applied manpower;
• Reduces electricity consumption by 50%;
• Is based on isocyanuric acid with disinfectant power, destroying the enterococcus faecium and escherichia coli microorganisms;
• Does not significantly form chlorination by-products, called trihalomethanes (thm) that are considered carcinogenic.
• 2 times more performance;
• High stability and durability even in the presence of UV rays;
• Does not cause allergies by not leaving residue;
• Total solubility in water, ensuring a crystal clear water;
• There are no known disadvantages.
What is myth and what is true in these procedures?

Following are some of the myths and truths that underlie water treatment in order to clarify the real effectiveness of these procedures in facilitating their decision. Keep up!
1. Chlorine is bad for your health. MYTH. What is bad for the health of swimmers is the excess of chlorine. When the ideal amounts of chlorine are respected according to the pool volume and appropriate measurements, this product is harmless to health. The origin of this myth may be related to chloramines. This is because they are chlorine by-products in reaction to dirt that cause burning eyes, itchy skin and other discomforts. Thus, chlorine in the pool does not bring health problems, but its excess or lack.
2. It is possible to adopt nly ozonation. MYTH. Although pool ozone is very effective as a chemical treatment, it is not possible to opt for ozone only. It is always necessary to keep a small amount of chlorine in water because excess ozone evaporates and turns back into oxygen. Thus, its combination with chlorine ensures that the pool will be protected longer than if only ozone were used. This is an indirect dependence on the methods, because ozone does treat water, however, the effectiveness of the procedure in swimming pools increases when we maintain about 0.5 ppm of chlorine in ozonated water.
3. Salinization makes the water more comfortable for the swimmer TRUTH. In fact, salinized water is more comfortable for the swimmer than chlorinated or ozonated water. This is because the human body is naturally salty - the body fluids we produce have a salinity content. Thus, when the skin comes into contact with salinized water, it finds a more pleasant environment that enables the body to adapt better to that environment. In addition, water contact with the eyes is more comfortable because the osmotic pressure in the ocular membrane is practically zero.
And we still have an advantage even in the case of drowning. This is because salinized water, when it reaches the lungs, causes less damage to the tissues, which causes less sequels to drowning person.
4. All three methods provide protection against infections. TRUTH. Both pool ozone, chlorine and salt have water disinfecting properties, eliminating microorganisms and inhibiting their proliferation. They all act on dirt and organic molecules, ensuring that the water is clean. What may vary between the methods is their scope in the fight against microorganisms, the time they remain treating the water, among other details. Either way, any of them are effective in ensuring the health of swimmers and a clean pool.
5. Ozone is more effective than chlorine TRUTH. Ozone is in fact more effective than chlorine because in addition to having a faster action against microorganisms (about 3.120 times), it can also fight some agents that chlorine does not fight in concentrations used in swimming pools, such as Giardia and Cryptosporidium. In addition, it does not generate resistance to microorganisms, and still has a very wide action, combating sunscreen residues, moisturizers, makeup, oils and suntan lotions. That is, it is a complete treatment. Because there are advantages and disadvantages to each procedure, it is important to consider all of these factors before making the choice and find out about details that still cast doubt on whether they are myths or truths about each one.

Why is preventive hotel pool maintenance important?

The dirt that contaminates the water comes from the outside, so it is important to minimize the amount of waste around the pool. Therefore, remove leaves, seeds, twigs, insects, dust and other items that may fall into the water. A good alternative is to avoid plants that change their leaves too much or produce flowers, seeds and fruits. In addition, it is essential to make the pavement of the surroundings, choosing a floor that does not release residues and is easily sanitized. Do not forget that it must be suitable for wet areas in order to avoid accidents.
2 - Measure the water parameters As the movement in collective pools is intense one of the main measures for preventive maintenance in hotels is to constantly measure water parameters. At peak times every four hours of use observe chlorine, pH, alkalinity and temperature if heated. Use specific kits for each parameter, opting for trusted brands. This is so that you get reliable parameters and can make the necessary corrections to avoid problems and complications. Correct parameters as needed Based on the results obtained, it may be necessary to correct the water parameters. Remember that pH is ideally between 7.0 and 7.4, alkalinity between 80 and 120 ppm and free chlorine between 1 and 3 ppm. If the parameters are above or below, use specific products to rebalance the water. Always use them as directed by the manufacturer and in the optimal amount according to the volume of the tank.
3 - Create (and follow) a cleaning routine Creating a pool cleaning routine helps a lot in doing preventive maintenance in hotels. This schedule makes it possible not to forget tasks, which will ensure that everything has been inspected, keeping the water quality up to date, as well as the operation of the engine room. Remember there are daily, weekly and monthly actions!
Every day:
• Control parameters and water temperature;
• Check the tank level;
• Remove debris.
• Brush the pool;
• Decant the water;
• Aspirate the bottom of the tank;
• Clean the edges;
• Empty the skimmer.
• Clean the filter;
• Check the hardness of the water;
• Investigate the presence of heavy metals;
• Measure cyanuric acid;
• Do bacteriological analysis.
Remember that some actions can be anticipated if necessary. Thus it is valid to observe if the schedule does not need to change to better meet the need of the pool.
4 - Perform machinery maintenance Filter cleaning is one of the steps of preventative maintenance in hotels. You also need to be aware of other equipment, both engine room and lighting and accessories. In the case of very specific actions, it is indicated to request the support of specialized companies. This is so that corrections are made correctly, avoiding damage to equipment and preventing accidents. In fact, all preventative hotel maintenance can be done by a pool treatment specialized company. This will ensure a quality service performed by professionals. That makes it possible to reduce the chances of errors, to ensure that the water will be of excellent quality and that everything will be working perfectly to serve guests.

What is the right method of taking care and measuring the pH of your pool?

PH measurement requires simple and essential products and equipment for all pool maintenance. To do this you must have a test kit where the right side measures the pH and the left side measures chlorine in the water. You need to fill it with pool water and then add on the right side five drops of a reagent called red phenol. After shaking the vial, the color obtained should be contrasted with the case's own color ruler. This will allow you to identify if the water pH is basic, neutral or acidic.

What is pH?

PH is a physicochemical measure that indicates the amount of hydrogen ions in the water. It can vary between 0 and 14, being considered acid between 0 and 6.9, neutral when it reaches 7 and basic when it is above 7,1 untill 14.
You may be wondering: but why is this important for my pool? The pH level is very important for the proper functioning of various other substances used for water maintenance. At appropriate levels, pH is able to optimize the action of chlorine and other products. This is explained by the fact that they all have an optimal pH for maximum efficiency and most often around 7.

Why is it important to measure pool pH?

Taking care and measuring the pH of the water of the pool is another very important factor to keep it always suitable for the users. The ideal pH of a pool should be between 7.0 and 7.4. When it is below or above these values, chlorine has its effect diminished, which contributes to the appearance of algae and bacteria.
In addition, the impaired chlorine performance can make the water turbid as it favors calcium deposition. Not to mention the performance of the filter, which is affected by inadequate pH and has a reduced filtering capacity.
As for sunbathers, you should take care of the pH of the water so that it does not cause reactions to them. Too high or too low pH can cause eye and skin irritation and compromise hair health.

How to treat water after measurement?

By measuring the pH, it is possible to know the type of treatment that will need to be done in the pool in order to provide the best possible comfort for swimmers. If it´s between 7.0 and 7.4, you don't have to worry because it's ideal for use.
If it´s below or above that, you need to keep an eye. In the first case, it is important to add soda (sodim carbonate) to raise pool´s pH.
In the second case, when it is above recommended, it is necessary to apply sodium bisulfate powder, also known as dry acid, or to use muriatic acid, both in concentration around 10%. (or aluminum sulfate, that also lowers the pH).
And remember: measuring the pool pH and keeping it controlled is less labor intensive than making a major correction, which may require some treatments to be effective. So take good care of your pool water, as this is the best way to ensure safe fun and relaxation for your users!

Top 5 Advantages of Using the Pool Cleaner

The pool cleaner is one of the most useful tools for cleaning and sanitizing your recreation area. There are two models: the conventional one - coupled to the pool pump - the one that your team cleans the pool floor manually, and the automatic models that do much of the cleaning process.
Regardless of the type of product you choose, using the pool cleaner translates into several benefits for the space´s maintenance. Want to know what they are? Join us in this reading.
Come on?
1. Reduces maintenance costs By removing concentrated debris at the bottom, you prevent these accumulated particles from turning into bacteria and buildup in piping and other equipment. When in excess, they make maintenance more costly, as well as possible early replacement of worn parts.
2. Improves water quality In the case of the pool cleaner, the idea is to remove any sinking particles - many of them can't even be seen with the naked eye. When the waters are agitated, they spread. As a result, vacuuming cannot be missed in cleaning processes.
3. Helps to collect waste after decanting Decanting is the chemical process that, in cleaning the pool, translates into solidifying particles that are not sucked into the pump, for example. These residues are the ones we mentioned in the previous topics that impair water quality if left drifting at the bottom of the pool. And it is the vacuum cleaner that is largely responsible for removing them permanently from your playing area.
4. Complementary step of the pool cleaning ritual Good pool cleaning goes through the following steps:
• Cleaning the deck around the pool;
• Skimmer cleaning;
• Cleaning the pool surface with the aid of a net;
• Cleaning the pool walls;
• Use of pool cleaner;
• Chlorine application.
Each one with its own particularity, however, aspiration is a process that should not be disregarded by your team - be it internal or outsourced.
5. Better quality of life for those who use the pool Finally, let's consider that the maintenance of the pool is not just to make the water crystal clear: its cleaning consists in promoting the health of users. After all, many diseases can be transmitted by lack of treatment, such as:
• allergies;
• Conjunctivitis;
• hepatitis;
• sinusitis;
• ringworm;
• Leptospirosis.
The pool cleaner plays a significant role in this disease prevention process.

How to choose a good pool cleaner?

Keep these details in mind when choosing your pool cleaner:
• It needs to have a bristle system that aspirates and at the same time brushes the floor and walls of the pool;
• Equipment must be practical, objective and accessible;
• The equipment should be suitable for the type of pool - such as masonry, fiber or vinyl;
• It is important that the equipment has a multi-hitch hitch, which is a feature that facilitates the movement of the pool cleaner to its full extent - including the corners.

8 steps on pool maintenance

Maintenance of swimming pools is essential for good diving quality. Several actions are needed to ensure that it is appropriate and safe for the health of swimmers. Get to know these actions now:
1. Clean the pool surroundings Remove surrounding dirt, including leaves, twigs, flowers, seeds, insects, sand, dirt and any other impurities. This is to prevent debris from falling back into the water. This cleaning can be done with brooms and blowers, or by washing with water.
2. Empty the skimmer and prefilter The skimmer is a sort of sieve that has the function of holding larger debris that falls into the water. Its cleaning is done manually, just like the pre-filter. Remember that the engine room must be shut down and the records closed.
3. Remove residues suspended in water With the aid of the net and the telescopic cable “catch” any debris that is suspended in the water or at the bottom of the pool. Don't worry if it causes agitation and ends up lifting the sedimented dirt. In the next steps it will also be removed.
4. Brush the tank Using the brush and the telescopic handle, brush the entire tank to remove any dirt and algae. Be sure to pay special attention to rounded areas where there are plumbing, lighting, and other equipment containing corners that accumulate dirt.
5. Decant the water To eliminate water turbidity use a decanter following the manufacturer's instructions. This product will agglomerate the small particles, which will become heavy and settle to the bottom, separating from the water. Remember that this product should be applied with the pump turned off so that it can act properly.
6. Vacuum the bottom After the settler action time has elapsed, use the bottom vacuum cleaner and flexible hose to remove sedimented dirt. Remember that the equipment must be connected to the sewer outlet so that dirt does not return to the pool.
7. Clean the edges Edge and waterline cleaning is also included in pool maintenance, and there is a specific product for that. Use as directed by manufacturer to eliminate dirt. This application is done manually, usually with the aid of a sponge.
8. Measure and correct chemical parameters After performing the physical cleaning is necessary to do the chemical treatment of water. This is an important step in pool maintenance, which ensures that they are properly treated so as not to affect the health of swimmers or proliferate bacteria.
Using specific kits, measure:
• the pH, which should be between 7.0 and 7.4;
• alkalinity, which should be between 80 and 120 ppm;
• Free chlorine, which should be between 1 and 3 ppm.
When there is variation of the results up or down it is necessary to correct the parameters using specific products for this. In the case of chlorine, when it exceeds the limit, it can also be allowed to evaporate naturally.
After making corrections, before releasing the dive pool, you need to re-evaluate the parameters to make sure they are within the recommended range, and it´s done! Your pool is clean and safe.
Other actions should also be performed periodically, such as cleaning the filter and changing the filter element. And remember that it is essential to use quality products and equipment to take care of the pool safely and effectively.
Therefore, it is interesting to have a specialized company in pool maintenance. This way you can purchase good brand products and opt for expert support to make the necessary corrections in your pool, without errors or waste.

Make sure the pool is in good condition

Make a visual survey for water crystallinity, bottom dirt and stains. Perform chlorine analysis with the aid of the test kit. Use the pool only when the chlorine content is within the optimal range.

Strong smell of chlorine

The strong odor is caused by chloramines, which is the result of the reaction of chlorine with nitrogen compounds found in sweat and urine among others. The odor demonstrates a need for pool water treatment.

Be careful when handling chemicals

When handling chemicals, care must be taken: the use of plastic gloves, a mask and goggles is important. It is advisable to pre-dilute chemicals prior to application.

Pool Filter Handling Tips

Pool sand filters have one or two pressure gauges. Among the various purposes of these pressure gauges is to indicate the need for backwashing of the filter element.
“But how to know when it´s time to backwashing, just looking at the pressure gauge?”Simple! When using the filter for the first time or after backwashing, mark the position of the pressure gauge on the dial with a crayon or a hydrographic pen.
If your filter has only one pressure gauge, watch the pointer and check if the pressure increase from the initial reaches 0.6kgf / cm². At this point, backwash should already be done and in the case of two pressure gauges when the difference between the two exceeds 1.2 kgf / cm².
Since we know that pressure gauges are useful for knowing the right time to backwash the filter, we should keep them in perfect working order.

The Importance of Pool Filter Sand Change

Changing the sand of a sand filter depends greatly on the care that is given to pool water. We particularly advise changing the filter sand annually, as we think it is better to always have a filter with maximum yield than to risk compromising pool filtration.
Water filtration is an important step in the physical treatment of the pool. Disregard this step brings the risk of having a milky, whitish, opaque-looking pool.

Why is it necessary to change the filter sand?

The friction caused between the sand granules during the filtration process causes them to wear out, and the dirt particles' holding capacity decreases. That is, the process becomes inefficient without this care.

When to change the sand of a pool filter?

Pool filter sand change occurs on two occasions: 2. When you notice the saturated filter sand.

What causes a lack of sand in the filter?

Filter sand generally does not decrease considerably when it is operating inside the filter (although a little sand is lost every time backwashing).
However it may happen that the sand level inside the filter decreases due to some filter problem. The most common problem that leads to sand loss is when a malfunction occurs in a filter part called crackle. When a crackle breaks inside the filter, it loses some of its filtering capacity and gradually loses its sand.
It is easy to see when filter crackle breaks, as during filter operation it throws sand into the pool through the return nozzles. Sand is usually only noticeable when it stops at the bottom of the pool.

Tips To Extend The Sand Life Of Your Pool Filter

· Always clean the pool pump prefilter after vacuuming to remove leaves and other trapped dirt, preventing clogging and facilitating the filtration process.
· Always clean the skimmer basket.
· Be sure to backwash the filter as needed.
· Clean the edges of the pool to remove excess dirt using a sponge of its own and some “edge clean” product, discarding material trapped in the sponge (see the correct way to clean the edge of the pool).
· Brush and sieve the pool to remove dirt and possible stains from the pool walls, as well as to remove solid materials from both the surface and the bottom.
(see the importance of pool brushing) By following these tips you can extend your filter's good dirt retention, but it is always worth remembering: it is essential to change the pool filter sand at least every two years!

Sand Filter Maintenance

It is part of the basic maintenance of the sand filter to periodically perform backwashing.
It is recommended to clean once a week, especially in summer or during periods of continuous use of the pool.

How to backwash the sand filter?

To backwash the sand filter, the first step is to turn off the pump, set the valve to backwash, open the sewage line registers (if you have one), and turn the pump on.
- The filter should only be stopped when the water passing through the display is clear.
- After backwashing the sand, we should rinse it. It is the second step to be followed.
- Rinsing, or pre-filtering, eliminates residual particles that are still suspended in water.
- The procedure is simple: turn off the pump, put the valve in the rinse function and turn the system back on with the sewage valve open.
- The last step is to return to filtering. Always remember that before moving the filter lever it is necessary to turn off the pump ok?
- Once the process is over, the sewer registry must be closed.
The result is crystal clear water without any residue.
But remember: the filter removes impurities from water, but has no disinfectant effect! This function is reserved for the action of chemicals such as chlorine or other types of treatments such as ozone generators or ultraviolet treatment.
There are cases, however, that the backwash process is not sufficient to ensure cleanliness of the pool, and is usually indicative of problems with the piping, sand or even the filter valves.
In this case, the ideal is to have the help of specialized companies capable of overhauling the equipment and determining whether partial or full replacement is required.

Sodium Dichloroisocyanurate X Calcium Hypochlorite: Know the Pros and Cons

• It is a very stable product due to its structure;
• Does not change the pH of the pool water;
• It is stabilized, protecting swimmers from microbiological hazards;
• Does not favor scale formation;
• Makes the pool water clear;
• Low oxidation power, not leading to the formation of trihalomethanes.
• It is a very unstable product that quickly loses the active ingredient;
• Causes changes in pool water pH, decreasing the disinfectant power;
• It is not stabilized, so it does not protect swimmers from microbiological hazards;
• Favors scale formation;
• Makes the water cloudy (milky).
• Has oxidizing characteristics leading to the formation of trihalomethanes.


Water quality is the result of a number of factors, including the perfect functioning of equipment, make an assessment.


The filter element retains suspended dirt while maintaining the crystallinity of the water. Controlled by a valve, the filter basically performs the following functions: filter, vacuum, recirculate, drain, backwash and close.
Filtration is the removal of insoluble particles that reach the pool for any reason.
The quality of filtration is related to the smaller particle size that the filter element can hold - the smaller the particles trapped, the higher the quality of filtration and hence the pool water.
To ensure water quality it is very important that the filters and pumps are correctly sized.

Vinyl and Fiber Coated Precautions

• Turn on the equipment before applying the products;
• Dilute products before applying them;
• The addition of the products must be done in a well distributed way over the pool surface;
• Always use soft brushes. Steel wool or similar material may damage the coating.

Get the treatment your pool deserves

Get the treatment your pool deserves
Click on the links to calculate the right size of each product for your pool.

Turbid water Green water Impurities present in water
Application Application Application
Stable ATpH
AT Shock Blue
AT Daily Blue
AT Floc Blue
ATclloro 3 in 1

Click on the links to calculate the right size of each product for your pool.

Turbid water Green water Impurities present in water
Application Application Application
Limper Alcali
Decanter Limper
Limper Choque
Limper Maintenance
Limper Floc
Limper Multi
Chlorination dosage table
First check pH alkalinity levels

Click on the links to calculate the right size of each product for your pool.

Use 4g for every 1,000 liters of water daily. Use 4g for every 1,000 liters of water daily. Use 2g for every 1,000 liters of water daily.
Use 15g for every 1,000 liters of water. Use 15g for every 1,000 liters of water.

Use 4g for every 1,000 liters of water daily. Use 4g for every 1,000 liters of water daily. Use 2g for every 1,000 liters of water daily.
Use 15g for every 1,000 liters of water. Use 15g for every 1,000 liters of water.
Use ATcllor Products
ATcllor and Limper products have been specifically developed for pool water treatment.